Non-Pressure Solar Water Heater (JNG581800-20)

The JINYI Solar JNG series of vacuum tube solar water heaters offer excellent value as they have a very low cost per kWh of output.

The collectors are also very easy to transport and handle as the tubes can be disconnected from the tank of the system.

Using a thermosiphon vacuum tube solar water heater systems is an excellent way to start saving on your domestic hot water heating bills. The tank must be above the collector, so the thermosiphon phenomenon can occur, circulation water from collector to tank.

Specification:
Vacuum tube: Dia. 58 x 1800mm, 20tubes
Absorber coating: AL/N/AL
Absorptance: A=0.88-0.92 (AM1.5)
Tank capacity: 158litre
Tank & tube capacity: 216litre
Insulation layer: 55mm
Assistant tank: 8L or 25L, with or without, optional
Solar collector absorber area: 2.30m²
Testing pressure: 0.5bar
Inlet & outlet: 3/4"
frame: Galvanized steel, 1.5mm
Collector angle: 27, 38, 45 degree, optional
Solar water heater working principle, non-pressure solar water heaters

Advantages:
1. Can he operated completely automatic if connect with intelligent solar controller.
2. Simple structure, easy plug-in installation, can be installed both on flat and inclined roof, and can be used with an
Auxiliary electric booster as to provide tot water without sunshine.
3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 50 65mm.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance.
6. Meet the mankind healthy bath standard: The material of inner tank is SUS304-2B stainless steel plate; The silica Gel ring sealing has a long life against the erosion and it ie not harmful to health.